The best way to cut down plywood panels. ✔
Pnuematic cylinders a bit long but this gives me the necessary dimensions and starts the process of building the ATC tool rack. #avidcnc
I’m about to enter uncharted territory, and my map is looking suspiciously like it was drawn on a napkin by a kindergartener during snack time. Going to have to get creative with the automatic tool rack and some pneumatics with the 4×8 table, there’s no extra travel room to change tools. #avidcnc #cncrouter #atcspindle
Can I put an ISO30 tool holder into a BT30 spindle?
No, you cannot directly insert an ISO30 tool holder into a BT30 spindle. The two types of tool holders have different tapers and dimensions, and are not compatible with each other.
ISO30 and BT30 are both common types of tool holder tapers used in CNC machining centers. The ISO30 taper is a 30mm taper with a 12-degree angle, while the BT30 taper is a 30mm taper with a 30-degree angle. While both tapers are designed to hold tools securely in a spindle, they are not interchangeable due to their differences in taper angle, length, and other dimensions.
If you need to use an ISO30 tool holder in a BT30 spindle, you would need to use an adapter. However, it’s important to note that using an adapter can affect the rigidity and accuracy of the tool setup, and may not be suitable for all applications. It’s recommended to consult with the machine tool manufacturer or a qualified tooling supplier before using an adapter.
🤣 I need to do a whole series of “everything I touch breaks” How does that even happen?
Oh you thought the CNC turned some profit last year? Nah think again, RIP spindle and wallet. 🤣
Crimping JST-XHP, DuPont & JST-SM connectors PROPERLY & EASILY!
IWS-3220M – https://amzn.to/3I4vJeo